Condorlube TF 22, the new polymeric lubricant for tube drawing

We have the pleasure in presenting you the new polymeric lubricant developed in Condoroil's laboratories: CONDORLUBE TF 22.

The use of CONDORLUBE TF 22 for the chemical preparation of carbon and stainless steel pipes drawing, guarantees a considerable saving linked to a simplification of the preparation cycle and to a lower wear of the tools. The use of a polymeric lubricant sees its main field of use in the mechanical industry where the request for a minimum residual can be an important assessment parameter in the choice of the pretreatment cycle to be used.

The reductions that can be achieved with CONDORLUBE TF 22, in terms of area and elongation section, are in the order of 40-45%. The product obtained has a residual which can be easily degreased in an alkaline environment. CONDORLUBE TF 22 provides a simple use management: not doing a chemical reaction, but only a physical deposition.

The product is maintained simply by restoring the mixture established in the starting phase. Concentration of CONDORLUBE TF 22 in water depends on the reduction or shaping which is carried out on the tube to be drawn. For optimum results the pipe to be treated in CONDORLUBE TF 22 must be free from oxide and oils/fats. The presence of metallic dust and dirt in general, or the presence of rinse water, contaminated by the pickling, on the material to be treated in CONDORLUBE TF 22 adversely affect the life of the product.