Laser micrometer for full carbide tools and blanks checking

MECLAB TOOL is a family of laser instruments to check full carbide tools and blanks, perfect to measure tools with odd or even cutting edges.
Ideal for off-line inspection and quality control.

Our Performance

MECLAB.T40 is a high precision laser instrument for quick and simple diameter measurements of hard metal blanks and full carbide cutting tools, odd or even edges. It’ s ideal for the off-line checking of

    drill bits
    end mills
    reamers
    cutting tools

It can be also used to check the diameter, the ovality and the straightness of hard metal blanks, ground pins or cylinders
It checks tolerances by comparing the actual dimensions to the programmed limits.
Measurement reports are printed out.
Simple and effective statistics are performed on measured data.
All results are stored in the memory and can be down-loaded to a remote Computer.


MECLAB.T perfect for the workshop: simple and cost effective, with manual rotation doesn’t require a PC.
This is the simplest and most cost effective system, allowing the manual (!) or motor driven rotation of the tool.

Meclab.T40 - The laser Micrometer to check full carbide tools and blanksMECLAB.T40
Measuring Field: 40 mm
Measurable Diameters: from 0.06 to 38 mm
Repeatability: up to ± 0.1 µm

SUPER-MECLAB+.T ideal for the lab: most performing, with automatic rotation, uses an embedded PC.
This is the most performing and sophisticated instrument, as it uses an embedded PC to process the measurement data.

Supermeclab.T40 - The laser Micrometer to check full carbide tools and blanksSUPER-MECLAB+.T40
Measuring Field: 40 mm
Measurable Diameters: from 0.06 to 38 mm
Repeatability: up to ± 0.1 µm

For more informations please visit the corporate website.