Take apart reels for metallic wire - Bosco

Very solid take-apart reel, particularly indicated for a continuous use in time. It is fully turned on the winding surfaces (barrel and inner flange) and on the flange ring. The available sizes are as per DIN 46395 specifications or as indicated by the Customer, for a normal use up to 1800 mm of flange diameter. It is supplied CE marked, with an instruction and maintenance manual.Indicated for metallic wire. To be used for high speed processing on a wiredrawing machine or for coil transfer.


It is supplied with the following alternative closing / dismounting options:

- central screw with a dead hole and safety lock
- central ring with a central feed-through hole and safety lock
- 3-side screws with central feed-through hole
- 4-side screws with central feed-through hole
- pneumatic operation and safety lock
- oil-pressure operation and safety lock


Available on request:

- dynamic balancing for speeds up to 50 m/s
- slots for the coil strapping in 3, 4, 6 or 8 positions
- arrangement for use with a cardboard tube
- size compatible for Z2, Z3 and Z4 coils
- false flange and adapters on the drum to reduce the traverse width
- vice for wire locking with automatic unlocking when the reel is dismounted
- cone-shaped drum
- cone-shaped drum for lifting and transferring the coil
- plastic / polyethylene / carpet / ... lining
- painting