Palletized uncoiler for wire coils TP 20 PL

This machine is designed for an easy, quick and reliable feeding of the wire to high-speed forming presses for the manufacture of screws, rivets and other metal parts. When changing the wire roll and splicing of the wire, the operator assisted by our machine can perform these operations in full autonomy and within a very short time. It enables to eliminate manual labour and consequently any risks of professional illnesses. In addition any risk of mechanical contact is highly reduced. In three words: savings, safety, productivity.

The mechanical strength of the thrust rollers – and the provision for the height adjustment as above – ensure an easy, quick, and safe wire pointing and splicing between the end of the coil being fed and the tail of the coil previously processed on the forming press. Another essential operation performed by the TP 20 PL Palletized Coiler is the straightening of the wire coil ends.. This feature enables to fully use up the wire coil ends (thus improving the material efficiency) and to ease any splicing with the following coil. The machine is completely independent from the forming press which is feeding and does not require any fixed pneumatic or electric connection. The machine drive is provided by a set of batteries and electro-mechanical and electro-hydraulic controls that ensure able to operate independently because of the battery unit and the internal electromechanical and electrohydraulic drives, which enable all the specified functions.