Bongard: wire and cable second-hand machinery on offer

Browse Bongard's latest acquisitions regarding second-hand wire and cable processing machinery and equipment: wire drawing lines, stranding machines, spoolers, and more.

Headquartered in Germany, BONGARD MACHINES GMBH & CO. KG has been specializing in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.


  FRIGERIO XN-125 bow stranding machine
11923 up to now used for: high carbon steel wire
total no. of bobbins: 1 + 6
spool flange Ø max: 1250 mm
twists per minute: 750
examples of production: 1/4" = 71 m/min / 3/8" = 104 m/min / 7/16" = 124 m/min / 1/2" = 144 m/min / 1/2"S = 144 m/min / 6/10" = 110,8 m/min / 6/10"S = 102,7 m/min
consisting of:

FRIGERIO IX-20-1.100 haul-off capstan
ATE continuous annealer
FRIGERIO AST 29 take-up
FRIGERIO AST 29 take-up
BSS-17 take-up

Details     FRIGERIO S1200/9 straight-line wire drawing machine
11929 suitable for: drawing of PC wire
no. of drafts: 9
inlet wire Ø max: 12 mm
drawing capstan Ø: 1200 mm
speed max: 15 m/s
consisting of:

FRIGERIO rotating pay-off
FRIGERIO BU-125 single spooler

Details     WAFIOS R5 wire straightening and cutting machine
11919 wire Ø min: 6 mm
wire Ø max: 12 mm
speed max: 117 m/min
outlet table length: 14 m
Details     WWM Automatic SS/W full automatic spooling line for welding wire
11903 suitable for: K 300 cage spool
wire Ø min: 0.8 mm
wire Ø max: 1.6 mm
speed max: 35 m/s
consisting of:

WWM CV.7W pay-off
WWM dancer

Details     BAUSSMANN 40 – 100 P2 nail collator
11921 suitable for: manufacturing of plastic collated nail strips with automatic cutting and coating
wire Ø min: 2.5 mm
wire Ø max: 4 mm
nail length min: 45 mm
nail length max: 100 mm
Details     KISTNER GV 16/5 straight-line wire drawing machine
11896 suitable for: drawing and ribbing of low carbon wire
no. of drafts: 5
inlet wire Ø max: 5.5 mm
drawing capstan Ø: 600 mm
consisting of:

EIGENBAU wire pay off, 2 position paralel
EIGENBAU loop catcher
GSG mechanical descaler
GSG powder coating
EIGENBAU single spooler
Details     HERBORN-BREITENBACH GHST-4,5-Do cold rolling line
11878 inlet wire Ø max: 13.2 mm
finished wire Ø max: 12 mm
finished wire Ø min: 5.5 mm
no. of drafts: 1
consisting of:

EIGENBAU wire pay off
EIGENBAU loop catcher
GSG mechanical descaler
GSG powder coating
HERBORN-BREITENBACH SPV 1250 A 3 station automatic spooler

Details     LUKAS DCI 5-200/410-40/1-25/6R inline wire drawing machine
11845 up to now used for: Cu enamelled wire
no. of drafts: 5
inlet wire Ø max: 4.5 mm
finished wire Ø min: 1.5 mm
Details     TECHNO TAU AW7/400 double spooler
11844 up to now used for: Cu enamelled wire
wire Ø min: 0.5 mm
wire Ø max: 2 mm
spool flange Ø max: 500 mm
Details     KOCH cold rolling line
11811 inlet wire Ø max: 14 mm
finished wire Ø max: 12 mm
finished wire Ø min: 5 mm
no. of drafts: 2
consisting of:

KOCH ENTV mechanical descaler
KOCH dry powder coating
KOCH ribbing cassette
KOCH KED 4000 double drawing block
KOCH KSS 1250 double spooler

Details     KOCH KGT 1600/2 + 1000/8 straight-line wire drawing machine
11754 suitable for: drawing of low and high carbon steel wire
no. of drafts: 10
inlet wire Ø max: 6.5 mm
finished wire Ø min: 1.4 mm
consisting of:

HERBORN SPA 1000 single spooler

Details     FRIGERIO S500/4 S400/7 straight-line wire drawing machine
11753 up to now used for: high carbon steel wire
inlet wire Ø max: 3.8 mm
finished wire Ø min: 0.6 mm
examples of production: Inlet wire Ø max. with low carbon wire: 5,5 mm
consisting of:

FRIGERIO BU 63 single spooler

Details     ITAL 80/25 extrusion line
11499 up to now used for: PVC, XLPE, HFFR compounds
screw Ø: 80 mm
screw length: 25 D
line speed: 150/200 m/min
consisting of:

ITAL 80.TS.100 extruder
EUROTEK cross head
cooling trough
CLINTON spark tester
movable take up
driven pay-off
AEROEL diameter controller
haul-off capstan
double take-up

Details     BÜHLER rolling line
11757 no. of stands: 3
material width max: 5 mm
material thickness max: 2 mm
wire Ø max: 4 mm
consisting of:

BÜHLER pay-off
BÜHLER dancer
BÜHLER take-up
FAUDI AS 1,5 KTA filter system

Details     EUROALPHA R1 rod breakdown drawing machine
11689 up to now used for: Al 99,7% (100N/mm²), AlFeMg (140N/mm²)
no. of drafts: 13
inlet wire Ø max: 9.5 mm
finished wire Ø min: 1.8 mm
speed max: 30 m/s
consisting of:

CLR 820 coiler

Details     SICTRA TFC 14T/5-15/CM+RC300/14 multiwire drawing machine
11723 up to now used for: Cu
no. of wires: 14
inlet wire Ø max: 0.45 mm
finished wire Ø min: 0.05 mm
consisting of:

SICTRA 329/211RC continuous annealer
SICTRA BO 63/C single spooler
Drum drainage station

Details     HI-DRAW MACHINERY straight-line wire drawing line
11728 up to now used for: low, medium and high carbon steel wire
no. of drafts: 5 + 1 (coiler with drawing die)
inlet wire Ø max: 8.5 mm
finished wire Ø min: 2.5 mm
consisting of:

LÄMNEA BRUK single spooler
HI-DRAW MACHINERY coiler with drawing die
uncoiler
uncoiler

Details     WAFIOS N 90 highspeed nail press
11441 no. of nails / minute: 800
wire Ø min: 2.4 mm
wire Ø max: 3.8 mm
nail length min: 48 mm
nail length max: 100 mm
consisting of:

WAFIOS GW 92 thread rolling machine
WAFIOS AHL driven pay-off unit

Details     WAFIOS R 10-60 wire straightening and cutting machine
11772 wire Ø min: 3 mm
wire Ø max: 10 mm
speed max: 80 m/min
outlet table length: 2000 mm
Details     VITARI NR 410 wire straightening and cutting machine
11809 wire Ø min: 5 mm
wire Ø max: 10 mm
outlet table length: 6000 mm
Details     FRISCH 300 Loose Tube SZ stranding line for FOC
11340 up to now used for: fiber optic cable
suitable for: stranding of 5 to 12 fiber optic loose tube with Ø 1,1 - 4,0 mm
lay length min: 60 mm
lay length max: 500 mm
consisting of:

DELACHAUX spool pay-off
FRISCH Central pay off
SWISSCAB DFO355R pay-off
MAILLEFER Chenille UA2 haul-off caterpillar
FRISCH take-up
Details     SETIC TC630i bunching machine
11679 twists per minute: 6500take-up spool flange Ø: 630 mm
cross section of core ma
x: 6 mm²

examples of production:
Production of strands from 0,08 mm copper wire and Unilay 19 or 37 wires strands from 0,10 mm.
Cross section from 0,06 - 6 mm² (flexible bunch), with eyelet bow in standard up to 4mm² for 7 and 19 wires
Stranding of 7 wires with Ø min 0,10 mm
Stranding of 7, 19, or 37 wires Unilay strands of hard or annealed copper
Laying up of 2 up to 8 insulated conductors with use of a special bow, Ø max 5,0 mm
Details     SETIC 675 PQ Four stars - stranding line
11416 suitable for: Twinning, Tripling and Quadding of flexible insulated conductors
Twinning, Trippling and Quadding of solid insulated conductors
spool flange Ø max: 630 mm
conductor Ø max: 2.4 mm
consisting of:

pay-off
pay-off

Details     SCHLATTER PG 24.1/12C mesh welding line
11417 suitable for: welding of Gabions, industrial fence and mesh
line wire Ø min: 3 mm
line wire Ø max: 6 mm
mesh width max: 2500 mm
Details     IDEAL GA 400/1600 mesh welding line
11136 suitable for: manufacturing of industrial mesh.
up to now in production for welding of cable trays with inline line wire cutting and automatic bending and stapeling with roboter.
line wire Ø min: 3 mm
line wire Ø max: 8 mm
cross wire Ø min: 2 mm
consisting of:

KUKA KR 125L100/2 robot
WEINBRENNER GP 125 mesh bending unit

Details     IDEAL GA 316 mesh welding line
11157 line wire Ø min: 1.5 mm
line wire Ø max: 8 mm
mesh width max: 1600 mm
no. of welding transformers: 6

additional data:
Line consist of:
automatic line wire feeding system (LDB).
pushing device.
welding machine.
pull out transport.
pull out transport with stamp.
1 x cross wire feeder for bottom wire with magazin (suitable for manufacturing of special double bar fence).
2 x cross wire magazin (suitable for different wire-Ø or cross wire length.
electric cabinet
automatic mesh stapeling device.
line wire feeding: automatic.
mesh weigth max.: 100 kg.
electrode force: 2.500 N.
air preasure: 26 bar.
cooling water consumption: approx. 35 l/min.
Details     BONGARD KW-650 TK static coiler
11199 suitable for: up to now used for coiling of insulated wires up to cross section of 35mm²
Ø of coiling capstan: 655 mm
barrel outside Ø: 800 mm
speed max: 1000 m/min
Details     SAMP TR/4-SV intermediate wire drawing machine
11175 up to now used for: Cu
no. of drafts: max/min 32/12
inlet wire Ø max: 1.65 mm
finished wire Ø max: 0.3 mm
finished wire Ø min: 0.1 mm
consisting of:

SAMP S.G.S.4 continuous annealer
SAMP TE/25-A automatic spooler

Details     M + E NMG25 + SP380 fine wire drawing machine
11141 up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 drafts installed)
inlet wire Ø max: 1.4 mm
finished wire Ø min: 0.08 mm
consisting of:

M + E SP 380 single spooler

Details     SKET 24x560 cage strander with backtwist
10975 up to now used for: steel wire
total no. of bobbins: 24
spool flange Ø max: 560 mm
cage revolutions: 60 min⁻¹
final rope Ø max: 25 mm
consisting of:

SKET haul-off capstan
SKET take-up
steel spool

Details     NIEHAUS SR 8+1 /650 tubular strander
10843 up to now used for: high carbon steel wire, reinforced concrete wire
single wire Ø max: 6 mm
core Ø max: 25 mm
lay length max: 220 mm
consisting of:

pay-off
double haul-off capstan
take-up

Details     STOLBERGER SVL 12/450 tubular strander
10847 up to now used for: steel wire, high carbon steel
spool flange Ø max: 450 mm
single wire Ø max: 3 mm strand / conductor Ø max: 6 mm
consisting of:

rotating pay-off
double haul-off capstan
STOLBERGER WAV 24L take-up

Details     steel spool
11911 no.: 280
spool flange Ø: 560 mm
spool bore Ø: 127 mm
Details     M + E BTS 1000 single spooler
11909 spool flange Ø max: 1000 mm
spool shaft: horizontal
speed max: 25 m/s
motor power: 55 kW
Details     LÄMNEA BRUK HDSPM 800/600 pay-off
11800 material Ø min: 1 mm
material Ø max: 4 mm
reel flange Ø max: 760 mm
Details     WTM taping line
11773 up to now used for: Aluminium foil, PE foil, Mica foil or paper foil
cable Ø: up to now used for 0,6 - 3,0 mm
speed: up to now used for 4 - 15 m/min
consisting of:

WTM spool pay-off
WTM take-up

Details     LESMO DTO 630 bunching machine
11667 up to now used for: Cu
twists per minute: 6000
take-up spool flange Ø: 630 mm
cross section of core max: 10 mm²
Details     OMA 16-104 HCM 2 double braider
11602 suitable for: Cu, steel, synthetic fibre
wire Ø min: 0.1 mm
wire Ø max: 0.25 mm
no. of spools: 16
consisting of:

OMA pay-off
OMA take-up

Details  
Contact Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
[email protected]