Used machinery and equipment
Second-hand equipment for sale: extrusion lines, welding units, and more
Browse Bongard's latest acquisitions regarding second-hand wire and cable processing machinery and equipment: core insulation lines, extrusion machinery, wire drawing equipment, and more.
The German BONGARD MACHINES GMBH & CO. KG has been specialising in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.
TROESTER steel rope / Prestressed concrete strand extrusion line
11981 up to now used for: M_HDPE
output capacity: 455-570 kg/h
examples of production: Rope diameter: 15.70 mm
Conductor shape stranded: 7 x 5,20 mm
Diameter after sheathing: max. 21,70 mm
Rope weight: 1.172 kg/m.
Rope weight after sheathing: 1.404 kg/m.
Max. line speed from winder to winder: 50 m/min.
Max. line speed from winder to coiler: 200 m/min.
consisting of:
TROESTER LABR 2225/13 pay-off
NF 0-100/820/1200 Tracking device
TROESTER AG 30_12 haul-off capstan
length measuring unit
SUBEC roll straightening unit
WIMA Tandem Grease emptying unit
Grease insert unit
LABOTEK Material hoper
SVR 50 transport unit
LT 6 blower
Suction lance
TROESTER PXA 120/25D extruder
screw transport unit
WEINREICH Tempering unit
Qu 40E Cross head
SIKORA Laser 2025 XY diameter controller
SIKORA Spark 2030 BS spark tester
TROESTER cooling trough
cooling unit telescop
dryer
cooling water supply unit 2m³
cooling water pump
cooling water supply unit heat exchanger
9040 C 1.1G Inkjet printer
AG 30/12 haul-off capstan
TROESTER LAFR 2225/25 take-up
TROESTER VE50-900-1000 Traversing unit
TROESTER LAFR 225/25 take-up
VE50-1100-1000 Traversing unit
Dancer unit
traversing unit
GCR Eurodraw BSS-1900 P.C. STRAND LAYER REWINDING LINE
electric cabinet
steel spools
Details
DUNST core insulation line
12024 up to now used for: PE, PVC und FEP, PFA, ETFE
cable Ø min: 2 mm
cable Ø max: 6 mm
speed max: 100 m/min
consisting of:
DUNST AT 12 5 100 ma pay-off
DUNST TS 630 2M B dancer
DUNST E 35 x 25 D extruder
DUNST E 30 x 25 D F extruder
DUNST CT 6 100 extendable cooling trough
DUNST cooling trough cold water
SIKORA Centerview 2010 excenter measuring device
DUNST CP 500 300 haul-off capstan
DUNST TS 630 2 M A dancer
DUNST AT 12 5 1 take-up
Details
SAMP MT8.2x7.27 multiwire drawing machine
12020 no. of wires: 14
inlet wire Ø max: 1,8 mm
finished wire Ø max: 0,3 mm
finished wire Ø min: 0,1 mm
consisting of:
SAMP R16M.14.14.1000 continuous annealer
SAMP TE/63-N single spooler
SAMP TE/63-N single spooler
Details
PWM EP 500 cold welding unit
11962 up to now used for: Cu, Al
wire Ø Cu min: 5 mm
wire Ø Cu max: 12.5 mm
wire Ø Al min: 5 mm
wire Ø Al max: 15 mm
Details
ZWICK BDO-FB030TN tensile testing machine
11961 drawing force: 300 - 30.000 N
additional data: with Preasure cel
without clamping jaws
Details
NIEHOFF SY500.D.3.G.E double spooler
11964 suitable for: for coiling of Cu and Al
wire Ø min: 1.5 mm
wire Ø max: 4.8 mm
spool flange Ø max: 630 mm
spool change : automatic
consisting of:
BOZDEMIR 6BAR/480 K8F dancer
Details
KUKAMA / KURRE core insulation line
11947 material: PVC
cable Ø max: 10 mm
no. of extruders: 2
additional data: - Manufacturer controller: EUROTHERM
The extrusion line is supplied with a rotating cross head (rotation speed adjustable by motor). This has the advantage that cables with a twisted colour strip can be produced.
consisting of:
KURRE PW 800 - 00 - 30T pay-off
KUKAMA KU 50-25 extruder
KUKAMA KU 35-25 extruder
SIKORA diameter controller
KUKAMA KW 5 Teleskopkühlrinne
KUKAMA cooling trough
cable dryer
SIKORA spark tester
SIKORA Laser 2025 XY diameter controller
KUKAMA DST 250 haul-off capstan
KUKAMA WP 630 take-up
Details
LESMO DTO 630 BM bunching machine
11941 up to now used for: Cu wire and strands
twists per minute: 6,000
take-up spool flange Ø: 630 mm
lay length max: 102.71 mm
Details KOCH CAM 25 D double horizontal pay-off
11939 wire Ø max: 25 mm
number of pay-off stations: 2
additional data: Mandral length: 2.000 mm
Number of Coils: 2 (1x in working position, 1x in loading(unloading position).
pay off: 180° rotating
Unbending pintch roll-Ø: 180 mm
Pintch roll drive: 2 x DC motors
with straightening unit (hydraulic adjustable)
number of rolls straightener: 2 + 3 (roll-Ø 130 mm)
Details
WWM Automatic SS/W full automatic spooling line for welding wire
11903 suitable for: K 300 cage spool
wire Ø min: 0.8 mm
wire Ø max: 1.6 mm
speed max: 35 m/s
consisting of:
WWM CV.7W pay-off
WWM dancer
Details
HERBORN-BREITENBACH GHST-4,5-Do cold rolling line
11878 inlet wire Ø max: 13.2 mm
finished wire Ø max: 12 mm
finished wire Ø min: 5.5 mm
no. of drafts: 1
consisting of:
EIGENBAU wire pay off
EIGENBAU loop catcher
GSG mechanical descaler
GSG powder coating
HERBORN-BREITENBACH SPV 1250 A 3 station automatic spooler
Details
FRIGERIO S500/4 S400/7 straight-line wire drawing machine
11753 up to now used for: high carbon steel wire
inlet wire Ø max: 3.8 mm
finished wire Ø min: 0.6 mm
examples of production: Inlet wire Ø max. with low carbon wire: 5,5 mm
consisting of:
FRIGERIO BU 63 single spooler
Details
HI-DRAW MACHINERY straight-line wire drawing line
11728 up to now used for: low, medium and high carbon steel wire
no. of drafts: 5 + 1 (coiler with drawing die)
inlet wire Ø max: 8.5 mm
finished wire Ø min: 2.5 mm
consisting of:
LÄMNEA BRUK single spooler
HI-DRAW MACHINERY coiler with drawing die
uncoiler
uncoiler
Details
Breitenbach / Sket / Koch overhead-type wire drawing machine
11069 no. of drafts: 7
inlet wire Ø max: 5.5 mm
finished wire Ø min: 2 mm
speed max: 10 m/s
consisting of:
KOCH KEWS 2 goose neck coiler
WIRE LAB COMPANY mechanical descaler
CARLO SALVI brush descaler
tiltable pay-off beams
Details
HERBORN-BREITENBACH M-3.R/4+G-4.0/8 straight-line wire drawing machine
10915 suitable for: drawing of low carbon and steel wire
no. of drafts: 8
inlet wire Ø max: 2.6 mm
finished wire Ø min: 0.8 mm
motor power: 8 x 15 kW
consisting of:
HERBORN-BREITENBACH single spooler
BREITENBACH spool pay-off
KISTNER TM 300 dancer
Details
BEKAERT CAZ straight-line wire drawing machine
10849 up to now used for: low carbon wire
no. of drafts: 10
inlet wire Ø max: 6.5 mm
drawing capstan Ø: 5 x 620 / 5 x 450 mm
speed max: 20 m/s
consisting of:
pay-off
descaler
BEKAERT dancer
BEKAERT single spooler
Details
KOCH KHZ 4500 straight-line wire drawing machine
10837 up to now used for: Steel wire with 350 N/mm² strength
no. of drafts: 3
inlet wire Ø max: 17 mm
finished wire Ø min: 7 mm
drawing capstan Ø: 1 x 900/740 / 1 x 900 mm
consisting of:
horizontal pay-off
KOCH KHZ 4500 double drawing block
KOCH KRE-1 wire pulling device
KOCH KHZ 4500 single drawing block
KOCH KRE-1 wire pulling device
KOCH KHS 1250-S traversing single spooler
spool tilting device
Details
GSG RWCB 400-3 brush descaler
10913 up to now used for: high carbon steel wire
suitable for: For brush descaling and removal of light rust
wire Ø min: 5.5 mm
wire Ø max: 16 mm
additional data:
Suitable for any wire quality
3 pair of brushes arranged in an offset of 60°.
Special brushing process achieves outstanding surface quality.
Automatically re-adjustment of brushes until complete wearout.
Long lifetime of brushings due to a high efficency degree.
Wire diameter (low carbon) 5,5 - 16,0 mm
Wire diameter (high carbon) 5,5 - 10,0 mm
Line consist of:
mechanical descaling unit (suitable up to Ø 12 mm wire).
Brush descaling unit.
Details
SKET 24x560 cage strander with backtwist
10975 up to now used for: steel wire
total no. of bobbins: 24
spool flange Ø max: 560 mm
cage revolutions: 60 min⁻¹
final rope Ø max: 25 mm
consisting of:
SKET haul-off capstan
SKET take-up
steel spool
Details
SKET SRN 8 x 630 tubular strander
10629 up to now used for: steel wire
total no. of bobbins: 8
spool flange Ø max: 630 mm
lay length max: 139.6 mm
Details
POURTIER CD 24-630 planetary strander
10437 up to now used for: steel wire
spools per cage: 24
spool flange Ø max: 630 mm
cage revolutions: 80 min⁻¹
cable Ø max: 54 mm
consisting of:
spool pay-off
rotating pay-off
double haul-off capstan
portal take-up
Details
SKET SRW 12 x 160 tubular strander
11215 total no. of bobbins: 12
spool flange Ø max: 160 mm
single wire Ø min: 0.19 mm
single wire Ø max: 0.35 mm
lay length max: 19.2 mm
consisting of:
SKET take-up
Details
KIESELSTEIN Rubin 16/4 + 16/5 straight-line wire drawing machine
10997 up to now used for: Al and Al alloys
suitable for: with modification also suitable for drawing low carbon wire with inlet -Ø 5,5 mm
no. of drafts: 9
inlet wire Ø max: 11 mm
examples of production: Ø11,00 mm - Ø4,0 mm in 9 steps
Ø 6.5 mm - 2.0 mm in 9 steps
consisting of:
SV 1000 single spooler
BEMA M300 dancer
Details
NIEHAUS SVM 36+1/250 tubular strander
10810 up to now used for: steel wire
total no. of bobbins: 36
spool flange Ø max: 250 mm
single wire Ø max: 2 mm
lay length max: 60 mm
consisting of:
pay-off
double haul-off capstan
take-up
Details
VITARI NR 410 wire straightening and cutting machine
11809 wire Ø min: 4 mm
wire Ø max: 10 mm
outlet table length: 6000 mm
Details
WAFIOS R5 wire straightening and cutting machine
11919 wire Ø min: 6 mm
wire Ø max: 12 mm
speed max: 117 m/min
outlet table length: 14 m
Details
SMEI SM-D16 B cold rolling line
10416 up to now used for: ribbed constructional steel wire
inlet wire Ø max: 14 mm
finished wire Ø min: 3.5 mm
no. of drafts: 2
speed max: 12 m/s
Details
IDEAL GA 400/1600 mesh welding line
11136 suitable for: manufacturing of industrial mesh.
up to now in production for welding of cable trays with inline line wire cutting and automatic bending and stapeling with roboter.
line wire Ø min: 3 mm
line wire Ø max: 8 mm
cross wire Ø min: 2 mm
consisting of:
KUKA KR 125L100/2 robot
WEINBRENNER GP 125 mesh bending unit
Details
SCHLATTER PG 24.1/12C mesh welding line
11417 suitable for: welding of Gabions, industrial fence and mesh
line wire Ø min: 3 mm
line wire Ø max: 6 mm
mesh width max: 2500 mm
Details
EVG G55/102-RV/15 mesh welding line
11686 line wire Ø max: 10 mm
cross wire Ø max: 10 mm
strokes (cross wire) min / max: 120
mesh width max: 2750 mm
Details
ATLAS COPCO GA 1107.5 compressor
11418 pressure max: 7.5 bar
capacity: 20160 l/min
motor power: 110 kW
Details
ITAL 80/25 extrusion line
11499 up to now used for: PVC, XLPE, HFFR compounds
screw Ø: 80 mm
screw length: 25 D
line speed: 150/200 m/min
consisting of:
ITAL 80.TS.100 extruder
EUROTEK cross head
cooling trough
CLINTON spark tester
movable take up
driven pay-off
AEROEL diameter controller
haul-off capstan
double take-up
Details
FRIGERIO RT 600R straight-line wire drawing machine
11580 up to now used for: high carbon steel wire up to 0,8% Carbon
no. of drafts: 11 + 1 (coiler with drawing die)
inlet wire Ø max: 6.5 mm
drawing capstan Ø: 600 mm
consisting of:
MARSHALL RICHARDS BARCRO coiler with drawing die
FRIGERIO BE 80-30 single spooler
pay-off
Details
SICTRA TFC 14T/5-15/CM+RC300/14 multiwire drawing machine
11723 up to now used for: Cu
no. of wires: 14
inlet wire Ø max: 0.45 mm
finished wire Ø min: 0.05 mm
consisting of:
SICTRA 329/211RC continuous annealer
SICTRA BO 63/C single spooler
Drum drainage station
Details
Contact Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
[email protected]
