Used machinery and equipment
Second-hand machinery for wire and cable: the latest offers by Bongard
Browse Bongard's latest acquisitions regarding second-hand wire and cable processing machinery and equipment: cold rolling lines, straightening and cutting machines, stranders and more.
Headquartered in Germany, BONGARD MACHINES GMBH & CO. KG has been specializing in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.
WAFIOS Nailmaster nail press
11829 no. of nails / minute: 1100
wire Ø min: 2.4 mm
wire Ø max: 3.8 mm
nail length min: 50 mm
nail length max: 100 mm
consisting of:
WAFIOS Threadmaster thread rolling machine
Details
KOCH cold rolling line
11811 inlet wire Ø max: 14 mm
finished wire Ø max: 12 mm
finished wire Ø min: 5 mm
no. of drafts: 2
consisting of:
KOCH ENTV mechanical descaler
KOCH dry powder coating
KOCH ribbing cassette
KOCH KED 4000 double drawing block
KOCH KSS 1250 double spooler
Details
POURTIER 1002 ST single twist stranding line for CAT 7
11833 suitable for: CAT 7 Cable
spool flange Ø max: 1000 mm
lay length max: 250 mm
speed max: 100 m/min
consisting of:
POURTIER vertical pair stranding unit
POURTIER capstan (4 single pair capstan)
POURTIER taping machine
POURTIER take-up
Details
VITARI NR 410 wire straightening and cutting machine
11809 wire Ø min: 5 mm
wire Ø max: 10 mm
outlet table length: 6000 mm
Details
ROSENDAHL core insulation line
11629 screw Ø: 60 mm
screw length: 24 D
examples of production:
up to now used for:
cable Ø max.: 13,0 mm
wall thickness: 0,8 - 3,0 mm
production speed max.:150 m/min
consisting of:
ROSENDAHL TW 1601-A pay-off
ROSENDAHL PTS 800/2/2 dancer
ROSENDAHL DSA 800 double haul-off capstan
SWISSCAB spinner
ROSENDAHL RE 1.60.24 extruder
KS 35/4A pull-out cooling trough
KS 35/3 cooling trough
KSU 35/50/800/0 diversion cooling basin
SIKORA diameter controller
SIKORA lump detector
ROSENDAHL DSA 800 double haul-off capstan
ROSENDAHL PTS 800/2/2 dancer
ROSENDAHL BA 800 haul-off capstan
ROSENDAHL TW 1601 take-up
Details
WTM taping line
11776 up to now used for: Aluminium foil, PE foil, Mica foil or paper foil
cable Ø: up to now used for 0,6 - 3,0 mm
speed: up to now used for 4 - 15 m/min
consisting of:
WTM spool pay-off
WTM take-up
Details
BÜHLER rolling line
11757 no. of stands: 3
material width max: 5 mm
material thickness max: 2 mm
wire Ø max: 4 mm
consisting of:
BÜHLER pay-off
BÜHLER dancer
BÜHLER take-up
FAUDI AS 1,5 KTA filter system
Details
KOCH KGT 1600/2 + 1000/8 straight-line wire drawing machine
11754 suitable for: drawing of low and high carbon steel wire
no. of drafts: 10
inlet wire Ø max: 6.5 mm
finished wire Ø min: 1.4 mm
consisting of:
HERBORN SPA 1000 single spooler
Details
FRIGERIO S500/4 S400/7 straight-line wire drawing machine
11753 up to now used for: high carbon steel wire
inlet wire Ø max: 3.8 mm
finished wire Ø min: 0.6 mm
examples of production: Inlet wire Ø max. with low carbon wire: 5,5 mm
consisting of:
FRIGERIO BU 63 single spooler
Details
EUROALPHA R1 rod breakdown drawing machine
11689 up to now used for: Al 99,7% (100N/mm²), AlFeMg (140N/mm²)
no. of drafts: 13
inlet wire Ø max: 9.5 mm
finished wire Ø min: 1.8 mm
speed max: 30 m/s
consisting of:
CLR 820 coiler
Details
HI-DRAW MACHINERY straight-line wire drawing line
11728 up to now used for: low, medium and high carbon steel wire
no. of drafts: 5 + 1 (coiler with drawing die)
inlet wire Ø max: 8.5 mm
finished wire Ø min: 2.5 mm
consisting of:
LÄMNEA BRUK single spooler
HI-DRAW MACHINERY coiler with drawing die
uncoiler
uncoiler
Details
SICTRA TFC 14T/5-15/CM+RC300/14 multiwire drawing machine
11723 up to now used for: Cu
no. of wires: 14
inlet wire Ø max: 0.45 mm
finished wire Ø min: 0.05 mm
consisting of:
SICTRA 329/211RC continuous annealer
SICTRA BO 63/C single spooler
Drum drainage station
Details
SETIC TC630i bunching machine
11679 twists per minute: 6500
take-up spool flange Ø: 630 mm
cross section of core max: 6 mm²
examples of production:
Production of strands from 0,08 mm copper wire and Unilay 19 or 37 wires strands from 0,10 mm.
Cross section from 0,06 - 6 mm² (flexible bunch), with eyelet bow in standard up to 4mm² for 7 and 19 wires
Stranding of 7 wires with Ø min 0,10 mm
Stranding of 7, 19, or 37 wires Unilay strands of hard or annealed copper
Laying up of 2 up to 8 insulated conductors with use of a special bow, Ø max 5,0 mm
Details
LESMO DTO 630 bunching machine
11667 up to now used for: Cu
twists per minute: 6000
take-up spool flange Ø: 630 mm
cross section of core max: 10 mm²
Details
ERDMANN DR 24-W4-LT ultrasonic cleaning line
11655 up to now used for: low carbon and high carbon steel wire
suitable for: cleaning of max. 24 wires inline with ultrasonic
Details
FRIGERIO RT 600R straight-line wire drawing machine
11580 up to now used for: high carbon steel wire up to 0,8% Carbon
no. of drafts: 11 + 1 (coiler with drawing die)
inlet wire Ø max: 6.5 mm
drawing capstan Ø: 600 mm
consisting of:
MARSHALL RICHARDS BARCRO coiler with drawing die
FRIGERIO BE 80-30 single spooler
pay-off
Details
ENKOTEC NP02 nail press
11569 no. of nails / minute: 2500
wire Ø min: 1.8 mm
wire Ø max: 2.5 mm
nail length max: 57 mm
consisting of:
ENKOTEC PD01 driven pay-off unit
Details
HENRICH 21W21&AR81 fine wire drawing machine
11536 up to now used for: Al and Al alloys
no. of drafts: 21
inlet wire Ø max: 3 mm
finished wire Ø max: 0.6 mm
finished wire Ø min: 0.15 mm
consisting of:
HENRICH single spooler
Details
ITAL 80/25 extrusion line
11499 up to now used for: PVC, XLPE, HFFR compounds
screw Ø: 80 mm
screw length: 25 D
line speed: 150/200 m/min
consisting of:
ITAL 80.TS.100 extruder
EUROTEK cross head
cooling trough
CLINTON spark tester
movable take up
driven pay-off
AEROEL diameter controller
haul-off capstan
double take-up
Details
HENRICH HFW-0800 static coiler
11433 up to now used for: Cu wire
material Ø min: 1 mm
material Ø max: 2.5 mm
Ø of coiling capstan: 800 mm
speed max: 32 m/s
Details
SCHLATTER PG 24.1/12C mesh welding line
11417 suitable for: welding of Gabions, industrial fence and mesh
line wire Ø min: 3 mm
line wire Ø max: 6 mm
mesh width max: 2500 mm
Details
FRISCH 300 Loose Tube SZ stranding line for FOC
11340 up to now used for: fiber optic cable
suitable for: stranding of 5 to 12 fiber optic loose tube with Ø 1,1 - 4,0 mm
lay length min: 60 mm
lay length max: 500 mm
consisting of: DELACHAUX spool pay-off
FRISCH Central pay off
SWISSCAB DFO355R pay-off
MAILLEFER Chenille UA2 haul-off caterpillar
FRISCH take-up
Details
SKET 24x560 cage strander with backtwist
10975 up to now used for: steel wire
total no. of bobbins: 24
spool flange Ø max: 560 mm
cage revolutions: 60 min⁻¹
final rope Ø max: 25 mm
consisting of:
SKET haul-off capstan
SKET take-up
steel spool
Details
STOLBERGER SVL 12/450 tubular strander
10847 up to now used for: steel wire, high carbon steel
spool flange Ø max: 450 mm
single wire Ø max: 3 mm
strand / conductor Ø max: 6 mm
consisting of:
rotating pay-off
double haul-off capstan
STOLBERGER WAV 24L take-up
Details
BONGARD KW-650 TK static coiler
11199 suitable for: up to now used for coiling of insulated wires up to cross section of 35mm²
Ø of coiling capstan: 655 mm
barrel outside Ø: 800 mm
speed max: 1000 m/min
Details
M + E NMG25 + SP380 fine wire drawing machine
11141 up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 drafts installed)
inlet wire Ø max: 1.4 mm
finished wire Ø min: 0.08 mm
consisting of:
M + E SP 380 single spooler
Details
IDEAL GA 400/1600 mesh welding line
11136 suitable for: manufacturing of industrial mesh.
up to now in production for welding of cable trays with inline line wire cutting and automatic bending and stapeling with roboter.
line wire Ø min: 3 mm
line wire Ø max: 8 mm
cross wire Ø min: 2 mm
consisting of:
KUKA KR 125L100/2 robot
WEINBRENNER GP 125 mesh bending unit
Details
BEMA SVS 6+1/50 bow stranding machine
10930 up to now used for: Cu
total no. of bobbins: 6+1
spool flange Ø max: 500 mm
core Ø max: 3.5 mm
rotor revolutions: 2000 min⁻¹
consisting of:
pay-off
haul-off capstan
ARV 10 HB0 take-up
Details
HERBORN-BREITENBACH M-3.R/4+G-4.0/8 straight-line wire drawing machine
10915 suitable for: drawing of low carbon and steel wire
no. of drafts: 8
inlet wire Ø max: 2.6 mm
finished wire Ø min: 0.8 mm
motor power: 8 x 15 kW
consisting of:
single spooler
Details
KUKAMA DWPA 630 double spooler
10008 up to now used for: insulated conductors, cores, wire
wire Ø max: 1.1 mm
cable Ø: max 2,5 mm
spool flange Ø max: 630 mm
cross section of core: 0,14 - 1,0 mm²
consisting of:
KUKAMA DST 250 haul-off capstan
Details
HERBORN T 30 intermediate wire drawing machine
9605 up to now used for: Cu
no. of drafts: 17
inlet wire Ø max: 2.76 mm
finished wire Ø min: 0.25 mm
speed max: 24.6 m/s
consisting of:
NIEHOFF VG 30 continuous annealer
HERBORN SE 501 F single spooler
Details
SURFACE ENGINEERING STX 4U belt grinding machine
11826 up to now used for: tubes and rods
suitable for:
Grinding for stock removal to remove surface defects and surface layer.
Creation of homogeneous looking with high quality satin finish or mirror polished surface.
Surface roughness improvement from RA 0 micron/mm to < 1,2 micron/mm
Feeding average speed adjustable grinding 5 mt/min to 15 mt/min
wire Ø min: 6 mm
wire Ø max: 25 mm
Details
LÄMNEA BRUK HDSPM 800/600 pay-off
11801 material Ø min: 1 mm
material Ø max: 4 mm
reel flange Ø max: 760 mm
Details
WMW RB1 - 4.0 OLT /Tig wire straightening and cutting machine
11804 suitable for: for straightening and cutting of C-steel and stainless steel wire
wire Ø min: 1 mm
wire Ø max: 3.2 mm
outlet table length: 1000 mm
Details
Contact Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
[email protected]
