Used machinery and equipment
Second-hand machines and equipment for the wire & cable industry
The German supplier of used wire and cable machines Bongard Machines GmbH & Co. KG regularly shows a selection of the best machines from its extensive stock on expometals.net.
Wire drawing machines, rolling machines, spools, cable making machines—here you will find a list of machines and equipment for all your wire and cable manufacturing and processing needs, from stand-alone machines to complete lines.
We are looking for Extrusion lines for PTFE Dry-type wire drawing lines for high carbon steel wire Multiwire drawing lines for Cu Tubular strander, 24/36 spools Peeling machines Cold rolling lines Conform extruder Straightening and cutting machines Braider
12405 EUROBEND MELC 16x3 INV wire straightening and cutting machine suitable for: straightening and cutting of cold and hot rolled Material from coil true hyperbolically profiled, high quality steel rollers
wire Ø min: 6 mm
wire Ø max: 16 mm
speed max: 240 m/min
outlet table length: 12000 mm
consisting of:
EUROBEND pay-off
EUROBEND pay-off
EUROBEND pay-off
12409 NIEHOFF D 630.1.4.A.3.GL double twist bunching machine twists per minute: 500... 6000
take-up spool flange Ø: 630 mm
single wire Ø max: 0,85 mm
cross section of core max: 6 mm²
speed max: 300 m/min
12399 HERBORN H 750-5 wet-type wire drawing line suitable for: round and profile wires, for sample trolley wires
no. of drafts: 5
inlet wire Ø max: 20 mm
finished wire Ø max: 16 mm
finished wire Ø min: 5 mm
consisting of:
STOLBERGER WHP 20 take-up
12398 SKET UDS 800 single spooler up to now used for: steel wire
technical condition: Very good (as new), machine was overhauled in year 2015 and equipped with new electrics (in production 5 months).
wire Ø min: 0,2 mm
spool flange Ø max: 800 mm
speed max: 12 m/s
11023 BARCRO D 13 rod breakdown drawing machine up to now used for: Al
no. of drafts: 13
inlet wire Ø max: 9.5 mm
wire elongation: 1 x 40 / 11 x 27 / 1 x 22,75 %
speed max: 25 m/s
consisting of:
dancer
BARCRO single spooler
12393 LEIMBACH DSH 12 pay-off suitable for: for winding CU wire from Ø1-5 mm or corrugated tube up to max. Ø7.5 mm
material Ø max: 7,5 mm
reel flange Ø max: 1250 mm
speed max: 120 m/min
12341 NIEHOFF WF 801.1.N.EA static coiler up to now used for: CU soft and hard diameter range 1,2 - 2,5 mm
material Ø min: 1,2 mm
material Ø max: 4,5 mm
Ø of coiling capstan: 830 mm
speed max: 33 m/s
12360 CANDOR electrolytic galvanising line up to now used for: low and medium carbon steel wire
no. of wires: 20
wire Ø min: 1,45 mm
wire Ø max: 3,55 mm
zinc thickness: 0,04 g/mm²
consisting of:
pay offs
LÄMNEA BRUK take up 18 stations
KOCH static coiler
KOCH static coiler
STAKU cooling trough
STAKU acid pickling
STAKU acid pickling
STAKU cascade rinsing
12363 ROSENDAHL RUL 1S FU rewinding line cable Ø: 1,5 - 3,5 mm
spool flange Ø max: 800 mm
total spool width max: 600 mm
examples of production: Product range max flat material: 7,0 mm
speed max: 300 m/s
consisting of:
ROSENDAHL pay-off (integrated)
ROSENDAHL take-up (integrated)
10915 HERBORN-BREITENBACH M-3.R/4+G-4.0/8 straight-line wire drawing machine suitable for: drawing of low carbon and steel wire
no. of drafts: 8
inlet wire Ø max: 2.6 mm
finished wire Ø min: 0.8 mm
motor power: 8 x 15 kW
consisting of:
HERBORN-BREITENBACH single spooler
BREITENBACH spool pay-off
KISTNER TM 300 dancer
11493 BEKAERT CAZ straight-line wire drawing machine up to now used for: low carbon wire
no. of drafts: 10
inlet wire Ø max: 6.5 mm
drawing capstan Ø: 5 x 620 / 5 x 450 mm
consisting of:
pay-off
descaler
BONGARD dancer
BEKAERT single spooler
11728 HI-DRAW MACHINERY straight-line wire drawing machine up to now used for: low, medium and high carbon steel wire
no. of drafts: 5 + 1 (coiler with drawing die)
inlet wire Ø max: 8.5 mm
finished wire Ø min: 2.5 mm
consisting of:
LÄMNEA BRUK single spooler
HI-DRAW MACHINERY coiler with drawing die
uncoiler
uncoiler
12186 KOCH cold rolling line inlet wire Ø max: 16 mm
finished wire Ø max: 14 mm
finished wire Ø min: 5 mm
no. of drafts: 2
speed max: 10 m/s
consisting of:
GSG string in device
GSG WEZ III mechanical descaler
GSG WBE4 brush descaler
GSG BST dry powder coating
GSG KWG 3 Rolling stand
GSG KWG 3 Rolling stand
KOCH KEG6300 drawing block
GSG DEG 9 relaxing unit
KOCH KSS 1250 W double spooler
12273 NIEHOFF M 85 F 13 rod breakdown drawing line up to now used for: Cu
no. of drafts: 13
inlet wire Ø max: 8 mm
inlet wire Ø min: 1,18 mm
finished wire Ø max: 3,2 mm
consisting of:
NIEHOFF VG 85 continuous annealer
TECHNOKABEL single spooler
BONGARD coiler
12316 NIEHOFF M 200.2.A.2121 intermediate wire drawing machine up to now used for: Cu
no. of drafts: 21
inlet wire Ø max: 2.2 mm
finished wire Ø min: 0,127 mm
speed max: 30 m/s
consisting of:
NIEHOFF VG 10.2.W400 continuous annealer
NIEHOFF SG 145.2.F.E single spooler
12311 GSG RWB 400/4 brush descaler wire Ø min: 5,5 mm
wire Ø max: 18 mm
no. of brushes: 4 x 2 (Paare)
brush Ø: 400 mm
12299 QUEINS 1+8 QPS 1120/900 cage stranding line with back twist suitable for: Production of the inner core of a so-called Hybriflex cable. The core of this cable consists of flexible single strands of 4 - 10mm² as well as glass fibre cables of different types. The gaps created during stranding are filled with filler and covered with foil.
spools per cage: 8
spool capacity max: 1500 kg
cage revolutions: 40 min⁻¹
take-up spool flange Ø: 4 x 1.120 / 4 x 900 mm
consisting of:
QUEINS CPO 1250/2 pay-off
QUEINS filler pay offs
QUEINS BZX 60/1-80 Central taping machine
QUEINS BZX 60/1-80 Central taping machine
QUEINS QDD 2 x 1200 double haul-off capstan
FRISCH take-up
SIKORA diameter controller
SIKORA 2060BS spark tester
QUEINS tension control measuring system for cage spools
11981 TROESTER steel rope / Prestressed concrete strand extrusion line up to now used for: M_HDPE
output capacity: 455-570 kg/h
examples of production: Rope diameter: 15.70 mm
Conductor shape stranded: 7 x 5,20 mm
Diameter after sheathing: max. 21,70 mm
Rope weight: 1.172 kg/m.
Rope weight after sheathing: 1.404 kg/m.
Max. line speed from winder to winder: 50 m/min.
Max. line speed from winder to coiler: 200 m/min.
consisting of:
TROESTER LABR 2225/13 pay-off
NF 0-100/820/1200 Tracking device
TROESTER AG 30_12 haul-off capstan
length measuring unit
SUBEC roll straightening unit
WIMA tandem grease emptying unit
Grease insert unit
LABOTEK Material hoper
SVR 50 transport unit
LT 6 blower
Suction lance
TROESTER PXA 120/25D extruder
screw transport unit
WEINREICH Tempering unit
Qu 40E Cross head
SIKORA Laser 2025 XY diameter controller
SIKORA Spark 2030 BS spark tester
TROESTER cooling trough
cooling unit telescop
dryer
cooling water supply unit 2m³
cooling water pump
cooling water supply unit heat exchanger
9040 C 1.1G Inkjet printer
AG 30/12 haul-off capstan
TROESTER LAFR 2225/25 take-up
TROESTER VE50-900-1000 Traversing unit
TROESTER LAFR 225/25 take-up
VE50-1100-1000 Traversing unit
Dancer unit
traversing unit
GCR Eurodraw BSS-1900 P.C. STRAND LAYER REWINDING LINE
electric cabinet
steel spool
12294 KMB DVL-630 double twist stranding line up to now used for: PE, PP, TPU, TPE, TPO, FEP, Tefzel, Zell-PE, Foam Skin-PE, Skin-Foam-Skin PE, Skin-Foam-Skin-PP, PA, Peek
suitable for: for stranding of single cores or pair Ø up to 3 mm cable
spool flange Ø max: 630 mm
cable Ø max: 7 mm
twists per minute: 4400
consisting of:
KMB VAD 560-2 double pay off with back twist
KMB ABL 630-2 double pay off with back twist
KMB dancer
12293 NIEHOFF D 561.1.A double twist bunching machine up to now used for: Cu, soft (bare, tinned or silver plated
twists per minute: 7000
take-up spool flange Ø: 400 - 560 mm
single wire Ø max: 0,67 mm
cross section of core max: 2,5 mm²
12233 SAMP BM 630-D double twist bunching machine up to now used for: Cu, bare
twists per minute: 6000
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
speed max: 300 m/min
12267 SCHMIDT A 165-260/18-65 automatic spooler up to now used for: high carbon steel wire
wire Ø max: 0,65 mm
spool flange Ø min: 165 mm
spool flange Ø max: 260 mm
additional data: No sale in the European Union to steel wire and rope wire producers except stainless steel wire.
11947 KUKAMA / KURRE core insulation line material: PVC
cable Ø max: 10 mm
no. of extruders: 2
additional data: - Manufacturer controller: EUROTHERM
The extrusion line is supplied with a rotating cross head (rotation speed adjustable by motor). This has the advantage that cables with a twisted colour strip can be produced.
consisting of:
KURRE PW 800 - 00 - 30T pay-off
KUKAMA KU 50-25 extruder
KUKAMA KU 35-25 extruder
SIKORA diameter controller
KUKAMA KW 5 Teleskopkühlrinne
KUKAMA cooling trough
cable dryer
SIKORA spark tester
SIKORA Laser 2025 XY diameter controller
KUKAMA DST 250 haul-off capstan
KUKAMA WP 630 take-up
12215 FRISCH SZ 300 SZ stranding machine suitable for:
Optical fibres up to min. 50/125 my-fibres with secondary coating of max. outer-Ø 4.4 mm (loose coating)
CU core cross-section: 0.12 - 0.15 mm²
High frequency ferrules with CU plated steel wire inner conductor Ø max. 0.6 mm, PE dielectric Ø max. 3.7 and Ø over braid + sheath max. 6.1 mm
cable Ø max: 26,5 mm
lay length min: 30 mm
lay length max: 500 mm
speed max: 60 m/min
consisting of:
pay-off unit
FRISCH portal pay-off
SWISSCAB RC 560/80 taping machine
SWISSCAB RC 560/80 taping machine
FRISCH single capstan haul-off
FRISCH take-up
12062 BEMA SE 160 single twist buncher technical condition: Electrical system should be renewed (water damage).
spool flange Ø max: 1600 mm
cable Ø max: 32 mm
rotor revolutions: 355 min⁻¹
speed max: 150 m/min
consisting of:
BEMA spool pay-off unit
Mükon foil pay-off unit
BEMA taping machine
11939 KOCH CAM 25 D double horizontal pay-off wire Ø max: 25 mm
number of pay-off stations: 2
additional data: Mandral length: 2.000 mm
Number of Coils: 2 (1x in working position, 1x in loading(unloading position).
pay off: 180° rotating
Unbending pintch roll-Ø: 180 mm
Pintch roll drive: 2 x DC motors
with straightening unit (hydraulic adjustable)
number of rolls straightener: 2 + 3 (roll-Ø 130 mm)
11810 OMSDELISI wire straightening and cutting machine wire Ø min: 6 mm
wire Ø max: 14 mm
outlet table length: 10000 mm
11538 HENRICH 21W21&AR81 fine wire drawing machine up to now used for: Al and Al alloys
no. of drafts: 21
inlet wire Ø max: 3 mm
finished wire Ø max: 0.6 mm
finished wire Ø min: 0.15 mm
consisting of:
HENRICH single spooler
11199 BONGARD KW-650 TK static coiler suitable for: up to now used for coiling of insulated wires up to cross section of 35mm²
Ø of coiling capstan: 655 mm
barrel outside Ø: 800 mm
speed max: 1000 m/min
11069 Breitenbach / Sket / Koch wire drawing machine multi drawing 2 blocks no. of drafts: 7
inlet wire Ø max: 5.5 mm
finished wire Ø min: 2 mm
speed max: 9 m/s
consisting of:
KOCH KEWS 2 goose neck coiler
WIRE LAB COMPANY mechanical descaler
CARLO SALVI brush descaler
10843 NIEHAUS SR 8+1 /650 tubular strander up to now used for: high carbon steel wire, reinforced concrete wire
single wire Ø max: 6 mm
core Ø max: 25 mm
lay length max: 220 mm
consisting of:
pay-off
double haul-off capstan
take-up
10847 STOLBERGER SVL 12/450 tubular strander up to now used for: steel wire, high carbon steel
spool flange Ø max: 450 mm
single wire Ø max: 3 mm
strand / conductor Ø max: 6 mm
consisting of:
rotating pay-off
double haul-off capstan
STOLBERGER WAV 24L take-up
10629 SKET SRN 8 x 630 tubular strander up to now used for: steel wire
total no. of bobbins: 8
spool flange Ø max: 630 mm
lay length max: 139.6 mm
Contact
Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany phone
Tel: +49 (2378) 915-5 E-Mail
[email protected]
