Used wire drawing machines and equipment on offer at WPMC

Single solid wire sizes range from 6 AWG (0.162" diameter) down to an almost microscopic 56 AWG (0.00049" diameter). There is a multitude of wire drawing systems to get from the larger size down to the smaller sizes. Here are a few of the items that the used equipment supplier Wire & Plastic Machinery Corporation has available:

Rod Breakdown - 

WRD1120 - Niehoff MM85 Dual Rod Line, 13 Die, Ceramic Draw Blocks, Niehoff R 501 Horizontal Annealer, Niehoff WF 800 Drop Coiler, Bongard KW 800 Drop Coiler, Upgraded 2017 Electrics-Siemens 760 KW/124 KW AC Motors. Yaskawa A 1000 Drives, AB PLC51, Logix 5571

WRD1107 - SKET 13 Die Rod Breakdown Machine with Annealer and Bongard 800mm Drop Coiler, 1994

WRD1105 - Niehoff M85 11 Die Rod Breakdown Machine with VG85 Annealer and 800 mm Bongard Drop Coiler

WRD1123 - Henrich 13 Die Rod Line, Model SE-13-01-SL, Annealer Model ES-01-DR-501-4, Bongard Coiiler Model KW 800, Year 1997 w/ upgraded Siemens Simoreg DC Drives, Siemens PLC (in the picture)

WRD980 - GCR Eurodraw 2 Wire, 14 Die Limited Slip, Alum/Alloys Rod Machine, Year 1999 w/ 2-50" Drop Coilers

WRD824 - Henrich 2 Wire Rod Machine, 13 Dies, 600 HP DC Motor, Year 1988

WRD1076 - Syncro FX-13 Rod Machine, ceramic blocks, 400 HP DC motor, Bekaert 300 KVA Annealer, Bekaert 24"/31" Dual Spooler, Year 1997

WRD1121 - Vaughn J15, 15 Die Rod Line, Ceramic Draw Blocks, Niehoff R 500 Annealer, 300 HP/60 HP Mentor II DC Drives, Endex/Niehoff ECC 18 Drop Coiler, Niehoff WF 801 Drop Coiler

WRD1026 - Syncro FX-13 Rod Line w/ F-Annealer, 30" Mark VII Dual Spooler. 400HP DC Drive

WRD1027 - Wire & Cable Tech CWF-13 Rod Line w/ Syncro F Annealer, Bongard 42" Drop Coiler (year 1999), AB 400 HP DC Drive

WRD989 - Syncro 18T10 Tandem Rod Line w/ Dual 30" Spooler

WRD897 - Bekaert KDA 9 Die Tandem Road Breakdown Machine, 500mm Ceramic Capstans. Year 1995

WRD769 - GBC/Niehoff/SAMP Rod Breakdown Line, GBC 5 Die Entry w/Coil Payoff, Niehoff M40 17 Die Finish Section, SAMP 800mm Spooler, Model TE85-M

WRD1108 - Syncro F-13 Rod Line w/ F Annealer, Dual Shaft 30" Spooler

WRD1059 - Syncro Rod Machine, Model FX-13

WRD1020 - Syncro Tandem Rod Breakdown Machine, Model 18-T-13

WRD1018.2 - Syncro FX-13 Rod Line w/Niehoff Annealer, 630 mm Shaftless Spooler, 400 HP DC

WRD1018.1 - Syncro Winget FX-13 Rod Line w/ Cook Annealer, 630 mm Viteck Spooler

WRD787 - Cook Rod Breakdown Line DH-4+8, Endex Annealer, Syncro 36" Drop Coiler

WRD704 - Cook Rod Breakdown Machine, DH6+8, SAMP RC-90 Rod Annealer

WRD916 - Cook 13 Die Rod Breakdown Drawer Line, DH4+8, 400HP DC, RA-6 Annealer, Dual 30" Spooler w/ECC Drives

Multiwire - 

WRD1114 - Niehoff 16 Wire Drawing Machine Model MMH101, Niehoff Annealer Model R141R.16.1500, 630mm Niehoff Spoolers (2) Model SNH 631.1.6.E, Year of Mfg 2000 

WRD1115 - Niehoff 16 wire Drawing Line, Type MMH101, 31 Die, R141R.16.1500 Annealer, (2) 630 mm Shaft Spoolers, S 631, Year 1998

WRD1090 - Niehoff 14 Wire Drawing Line, Model MMH120, RM 200 Annealer, 800 mm Shaftless, Dynamic Spooler. Year 1994

WRD1041 - Niehoff Multi Wire Line Model MMH101.E2 w/Annealer, (2) 800 mm Shaftless Spoolers

WRD931 - Eurodraw 16-Wire Multidraw Line MSS.100.16 for Alloys w/ Multi-strand Annealing Furnace, (4) 800 mm Static Spoolers, Year 2001 (8 available)

WRD831 - SAMP 8 Wire Line Complete, Model MT8.2.4.21, R16M. Annealer, 800 mm Spooler. Start 2.05mm,. Year 1996 

WRD678 - SAMP Multi-wire 14 Wire Drawing Line, MLS/ST.14, MT8 (7+7). 31 Dies, R12 Annealer & (2) 630mm Dynamic Spoolers, Year 1993

WRD899 - Bekaert Multiwire Drawing Line, Model KDM-14, 21 Die w/GKM Annealer, 800mm OBK Spooler, Year 1991

WRD1031 - Nextrom 7 Wire Drawing/Annealing Line,29 Die, 12 AWG (2.05mm)--32/38 AWG (0.10/0.20mm), Year 1999 (2 available)

WRD1017 - SAMP 2 Wire Drawing/Annealing Line, MT16.2/R 16.2.2.500 (2 available)

WRD1016 - Nextrom 4 Wire Drawing/Annealing Line, MGB 17/4, Year 1999

WRD973 - Henrich 8 Wire Multiwire line w/Annealer, 800 mm Static Coiler

WRD968 - Nextrom 12 Wire Drawing Line, Syncro Nextrom Annealer, Syncro Nextrom 630/800mm Spoolers

WRD942 - SAMP Multi-Wire 10 Wire Drawing Line, MT10.10.22 Wire Drawing Sections, R14.10.10 Annealer

WRD943 - SAMP Multi-Wire 10 Wire Drawing Line, MT10.10.22 Wire Drawing Section, RC/60 Annealer & SS/1-630 mm Spooler

WRD944 - SAMP Multi-Wire 8 Wire Drawing Line with MS/C/8/21 Wire Drawing Section, RC/60 Annealer & SS/1-630 Spooler

WRD770 - SAMP 2 Wire Drawing Machine, MT25.2, Annealer R25.5 (Model TRB2-2), 150KW DC

WRD451 - Niehoff 10 Wire Drawing Machine, MZE 121.20, R160 Annealer, (2) SG 145 Spoolers

WRD921 - SAMP MT16.2,2 Wire Drawing Line, w/ SAMP R16.2 Annealer, (2) SAMP TE/45-M Spoolers

Intermediate/Tandem - 

WRD1081 - Niehoff MT 200 Wire drawer w/RDA 200 Annealer, AC Vector Drive, Year 2000 (2 available)

WRD1021 - Niehoff Tandem Draw/Annealing, MT200/RDA200, Year 1999

WRD1071 - SAMP TR/2-TP Tandem Intermediate Wire Drawer/Annealer/Preheater, Year 1997

WRD996 - SAMP TR/2-TP-R Tandem Wire Draw/Anneal, Year 1999

WRD1064.1 - SAMP TR/2-T Wire Drawing/Annealer, TE/45-M Spooler (2 available)

WRD837 - Niehoff Intermediate Wire Drawing/Annealing Machine, M30/ VG30

WRD817 - Nextrom Tandem Wire Drawer, GTE-17 w/ Annealer, Preheater, DC Drive

WRD653 - Sket Intermediate Wire Drawing Line, ZLWG w/ Annealer, Spooler

WRD746 - Henrich Tandem Wire Drawing, 150 HP DC Drive w/Model EB/3 100 KVA DC Annealer (6 available)

WRD1024.2 - Syncro C13 Intermediate Wire Drawer, C3 Annealer, 30" DFH Spooler, DC Drives

WRD808.1 - Syncro C-13 Intermediate Drawing Machine w/ C3 Annealer, 30" DFH Spooler, AC Drives

WRD695 - Syncro Intermediate Wire Drawing Line, C13, C3 Annealer, 30" Spooler, DC Drive

WRD715 - Cook Intermediate Wire Drawing Machine, Model l-17, Syncro C3 Annealer, 30" DFH Spooler, DC Drive

Fine Wire - 

WRD895 - SAMP TRB-3 (MS200) Fine Wire Drawing Machine w/ RC15 Annealer, 16" TE-42 Spooler, 60 HP DC Reliance Drives

WRD811 - SAMP Fine Wire Drawing Machine, TRB-3, 450mm Spooler (6 available)

WRD779 - SAMP TRB-3 Wire Drawing Line, RC15 Annealer/TE42 Spooler

WRD679 - SAMP Fine Wire Drawing Machine, TRB-3, w/RC15 Annealer, TE/25-A 10" Spooler

WRD914 - Syncro BG-16 , C3 Annealer, 30" DFH spooler

WRD864 - Cook Fine Wire FM16 Wire Drawing Machine, RA2 Annealer, S12 Spooler 12"

WRD775 - SAMP Fine Wire Drawing Machine, Model MS206, RC11 Annealer, TE45 16" Spooler

WRD718 - Syncro Fine Wire Drawing Machine, AG-16, Annealer/Spooler (10 available)


RECENTLY ACQUIRED
A listing of the latest items Wire & Plastic Machinery Corp. has acquired:

*************************************
BRD503 - OMA 16C Textile Braider w/ 12500 mm Payoff & Takeup, Vertical Dancer, Year 2006 (Qty 3)

EXPL458 - Davis Standard 75 mm, 24:1 Extrusion Line w/18" Multipass Idler, 24" Belt Wrap Capstan, TEC 50" Dual Takeup, (2) TEC Vertical Accumulators, Sikora Hot/Cold Gages

*************************************

TKU1612 - 16" Clipper PA-16 Dual Parallel Shaft Takeup, Fincor DC Drives, ATCOM PLC

RWD643 - EPS 6.5" Rewind Line, Model EM-50 w/Single Cone Flyer Payoff, Vertical Dancer

EXP1402 - 2.5" Davis Standard, 24: 1 L/D Thermatic III, 40HP DC Brushless Motor, Drive Panel, 1989

EXP1403 - 1" Davis Standard Vertical Extruder, 25:1 L/D, Allen Bradley 1336 Impact AC Drive, 1999

EXP1404 - 3.5" Davis Standard, 24:1 L/D, Thermatic III, 75 HP AC Marathon Motor, Allen Bradley 1336 Impact Drive and Panel. 1993

EXP1405 - 1" Davis Standard Vertical Extruder, 25:1 L/D, Allen Bradley 1336 Impact AC Drive, 1999

EXP1406.1 - 2" Berlyn Extruder, 24:1 L/D, 30 HP DC Motor, Drive Panel with Baldor DC Regen Drive, 2 available

EXPL456 - 2.5" Davis Standard, 24:1 Thermatic III with 1" D-S Vertical CoExtruder, Metaplast Stainless Steel Tank, Metaplast 24" Caterpuller, Metaplast Shear, Stainless Steel Dump Table 

EXPL457 - 3.5" Davis Standard, 24:1 Thermatic III with 1" D-S Vertical CoExtruder, Metaplast Stainless Steel Tank, Metaplast 50" Cleat Caterpuller, Metaplast Shear, Stainless Steel Dump Table 

PAY2280 - 2.6 Meter Maillefer Portal Reel Payoff, 10,000kg Capacity, Year 2011

TKU1608 - 2.6m Maillefer Portal Reel Takeup, 10,000 kg Capacity, Year 2011

CAT643 - 48" Bartell Belt Caterpuller, 15HP DC Motor, R-L

TKU1607 - 48" Royle Shaftless Takeup, Fixed Height

TKU1605 - 72" Davis Electric Shaftless Takeup, 10HP Baldor DC Drive Motor, 4 speed Drive-All

CBR1346 - 560mm Watson Kinrei NB-560 Double Twist Twinner, 1998 (7 available)

BIN232 - Robolon Single Concentric Binding Head, 4000 rpm, 2012

RWD641 - 630mm Setic ICL630N Single Frame Shaftless Rewind Line, Backup Function, AC Vector Drives, A-B PLC, 2001


EXTRUSION EQUIPMENT Here's the range of extrusion equipment that WPMC has on hand. 

Thermoplastic - 
EXP1403 - 1" Davis Standard Vertical Extruder, 25:1 L/D, Allen Bradley 1336 Impact AC Drive, 1999

EXP1405 - 1" Davis Standard Vertical Extruder, 25:1 L/D, Allen Bradley 1336 Impact AC Drive, 1999

EXP1327 - Rosendahl 30 mm, 24:1 Extruder w/ 10 HP Siemens AC Drive/PLC, Temp.controls, Year 2001 (2 Available)

EXP1363 - 1 1/4" Davis Standard 24: 1 L/D, Vertical Extruder (3 Available)

EXP1202 - 1 1/2" Davis Standard 24:1 Extruder, Air cooled,15 HP DC Motor, Year 1990

EXP1360 - 2" Davis Standard 24:1 L/D, Thermatic III, 30HP DC Motor, Rebuilt Head Clamp, Year 2003

EXP1330 - 2" Davis Standard/NRM Hi Temp Extruder, 30: 1 L/D

EXP1406.1 - 2" Berlyn Extruder, 24:1 L/D, 30 HP DC Motor, Drive Panel with Baldor DC Regen Drive, (2 available)

EXP1237 - 60 mm Nextrom Extruder, 24:1 L/D, Model NMB60-24D, Year 2000

EXP1402 - 2.5" Davis Standard, 24: 1 L/D Thermatic III, 40HP DC Brushless Motor, Drive Panel, 1989

EXP1283 - 2 1/2" Davis Standard 24:1,Thermatic III, Air Cooled, 40HP DC Drive

EXP1234 - 80 mm  Maillefer Extruder, 24:1 L/D, Model BM8024D

EXP1404 - 3.5" Davis Standard, 24:1 L/D, Thermatic III, 75 HP AC Marathon Motor, Allen Bradley 1336 Impact Drive and Panel. 1993

EXP1067 - 3 1/2" Davis Standard Extruder, 24:1 L/D, Thermatic III, 75 HP DC motor, Temp/Drive Panel

EXP1221 - 4.5" Davis Standard 24:1 L/D, Thermatic II, No Motor

EXP1304 - 120 mm Nokia Maillefer 24:1 Model BMA 120, Water cooled, 200 HP DC Drive

EXP1167 - 120 mm Rosendahl Extruder, 30:1 L/D, Model RE1-120-30

EXP1239 - 6" American Kuhne 24:1 L/D Air cooled extruder, Year 2001

EXP1166 - 150 mm Rosendahl Extruder, 30:1 L/D, Model RE1-150-30

Thermoplastic Extrusion Lines - 
EXPL310 - 1.5", 24:1 L/D Davis Standard Extrusion Line with 24" Belt Wrap Capstan, PA-16 Clipper Dual Takeup, Beta MCS120 Preheater, Year 1996

EXPL449 – 2” Royle 24:1 Primary Line, 24” Dual Cone Payoff, 12” Multi-Pass Capstan, Zumbach ODAC, USYS, 24” Parallel Axis Dual Take-up

EXPL421 - Davis Standard 2", 30:1 Hi Temp Line w/ Multipass Capstan, Clipper PA-24 Takeup, KuKuma 630 mm Driven Payoff, Preheater, Dryer, Sparker, Diameter gages, Temp/Drive panel w/Siemens AC Drives. Year 2000

EXPL417 - 2" Davis Standard 24:1 Hi Temp Extruding Line w/Nokia Maillefer EKP-800 Dual Takeup, Year 1995

EXPL414 - Niehoff MT200/Davis Standard 2", 30:1 Hi Temp Tandem Line, Viteck Multipass Capstan, Year 1997

EXP1313 - 2.5" Jennings PTFE Ram extruder, Model 8108, 50 Ton Hydraulic, 108" stroke,Year 2005 24" Heated Capstan, Vertical Oven System, Payoff, Takeup, Preform Press w/Elevator, Tooling

EXPL456 - 2.5" Davis Standard, 24:1 Thermatic III with 1" D-S Vertical CoExtruder, Metaplast Stainless Steel Tank, Metaplast 24" Caterpuller, Metaplast Shear, Stainless Steel Dump Table

EXPL458 - Davis Standard 75 mm, 24:1 Extrusion Line w/18" Multipass Idler, 24" Belt Wrap Capstan, TEC 50" Dual Takeup, (2) TEC Vertical Accumulators, Sikora Hot/Cold Gages

EXPL447 - Nextrom 80 mm 24:1 Loose Tube Extrusion Line, Year 2001, w/ 12 position RST 300/12 Ribbon Payoff Strander, NMB 24-80D Extruder, 20m Water Trough, Caterpuller BC 25, Belt Capstan BC1000, 2.24m Portal Takeup

EXPL416 - 3 1/2" Viteck 24:1 Fiber Jacketing Line w/36" Belt Wrap Capstan, Vector Drives

EXPL457 - 3.5" Davis Standard, 24:1 Thermatic III with 1" D-S Vertical CoExtruder, Metaplast Stainless Steel Tank, Metaplast 50" Cleat Caterpuller, Metaplast Shear, Stainless Steel Dump Table 

EXPL217 - 3.5", 24:1 L/D Davis Standard Thermatic III with 30" Clipper Flyer Payoff, 18" Multipass Capstan, 30" PA-30 Auto Dual Takeup

EXPL369 - 4.5", 24:1 L/D Davis Standard Thermatic III Jacketing Line with 1m Meltech Shaftless Driven Payoff, 1m AutoReel Shaftless Driven Payoff, 900mm Meltech Belt Caterpuller, Meltech Vertical Dancer, Year 2005

Rubber - 
EXR190 - 75mm Davis Standard Rubber Extruder, Model 75mm 25H

EXPL370 - 75 mm 13:1, Meltech/Boston Matthews Silicone Extrusion Line, Year 2003

EXRL25 - 2.5", 24:1  Davis Standard Thermatic III CV Line w/ (3) 36" Belt Wrap Capstans, 48" Hall Shaftless Payoff & Takeup

EXRL34 - 2.5" Davis Standard Thermatic III CV Line, 15:1, 36" Payoff, 36" Dual Takeup, (2) 24" Belt Wrap Capstans

EXRL39 - 3 1/2" Davis Standard 15:1 L/D, Thermatic III CV Extrusion Line

EXR202 - 3 1/2" Davis Standard 15:1 Therm III, Rubber Extruder, Model 35IN35 Year 1996

EXR200 - 3 1/2" Davis Standard. 20:1 L/D Rubber Extruder, Thermatic II, Cleaned, Painted, Rebuilt

EXR205 - Rebuilt 4 1/2" Davis Standard Rubber Extruder, 20:1 L/D, Thermatic II

EXR197 - 6" Davis Standard 11:1 L/D Thermatic II Rubber Extruder, 250 HP DC Omron Motor