VG402: a drawing system with two components from Vassena Filiere

The die has a core that is well dimensioned compared to the holes; it is assembled in fixed and immovable way in its compact casing in standard, commonly used, measures. The pressure die, with cylindrical hole and pointed final part made of hard metal, fits perfectly in the cone entrance of the die, permitting the removal of the lubricant solidification in the cone of the die, during the pauses.

The particular structure of the pressure core guarantees efficacy and constancy to the lubrication. The support beat gives more stability and less vibration to the core and consequently less possibilities of breakage and more reduction of wire vibration.   Moreover the system VG402 is equipped with a drain hole that permits the possible loss of lubricant, that could be caused by an excess of pressure, to return into the box that contains lubricant.Die and pressure die are assembled in an extremely easy and fast way by the operator without waste of time and without the use of particular tools, as the assemblage is effected with a light manual pressure of the two components. As the core is assembled as it was a normal die, even the possible operation of reconditioning is made easy, in the case you wish to reuse the system more times. Using the reduction ring, Die VG402 becomes again a normal die.