Wire drawing machines for carbon steel, stainless steel and alloy steel wires

Lämneå Bruk makes wire drawing machines for the entire wire industry, from Low Carbon to High Carbon, wet or dry wire, and drawing machines from 2 up to whatever your manufacturing needs number of blocks.

The frame of the drawing machine is self-supporting and needs only a flat surface for installation. With Lämneå Bruk's drawing machine you get a nonslip, non-accumulating continuous drawing machine. Lämneå Bruk's development in the fields of control and maintenance has resulted in a design of unparalleled ease of operation and reliability in wire drawing machines.

The wire in a Lämneå Bruk Drawing Machine is routed from the upper part of each block and then through the next die, in a straight line, and onto the lower part of the following block. This path results in the wire being bent in only one plain.

The newest design of Lämneå Bruk's drawing machine is the adjustable tilted tables. The tilted table design enables a high volume of wire to be stored on each block and the high-level wire accumulation provides the optimum conditions for effective cooling.

Depending on your wire drawing you can adjust the tilting to your preferred and most suitable level. The drawing machine is very flexible allowing start from any block, bypass any block/blocks, any number, and finish on any block you want.

Possible speed control options that are available for Lämneå Bruk Drawing machine are: straight line, without anything that is touching the wire between the blocks, control arm between the blocks, and loop line with full dancer.